 |
|
BHARAT TOE, BHARAT PRIME
|
|
Large dia cap sensitive aluminised water gel primers. They release maximum
explosive energy to give optimum blast-ing results and maximum operational economy
when used in combination with BHARAT base and BHARAT column. Make an effective
column charge in association with BHARAT base or BHARAT column.
|
|
BHARAT BASE
|
|
Large dia non cap sensitive water gel explosives for base and column charge. BHARAT
BASE is non aluminised high strength , high vod and high energy base charge
explosive This can be effectively used in combination with BHARAT TOE for very hard
strata and in adverse conditions, particularly in removing TOE problems. BHARAT BASE
can also be boostered with BHARAT PRIME for effective blasting results in hard rock.
|
|
BHARAT COLUMN
|
|
Large dia non-capsensitive wate gel explosive for base and column charge. Excellent
column charge when used in combination with BHARAT TOE or BHARAT PRIME for all types
of strata.
They can also be used safely in hot holes encountered in fire seams open cast coal mines.
|
|
BHARAT MITE
|
|
Large dia non-cap sensitive low density powder explosive for column charge , in medium
hard strata. in combination with either BHARAT TOE or BHARAT PRIME. It si effective and
economical. It is also usefull in boreholes where good column build-up is required.
|
|
BHARAT BLAST 80, BHARAT BLAST 60
|
|
Small dia aluninised capsensitive water gel explosives, They are powerful explosives
with typical characteristics of maximum energy concentration. They are highly suitable
for effective small dia blasting in open cast as well as underground metal mines. They
are also suited for tunneling, well sinking an other general applications. They are
highly water resistant, give excellent pragmentation associated with high degree of
safety from mechanical impacts and friction.
|
|
SITE MIXED EXPLOSIVE
|
|
Straight emulsion and heavy anfo explosives for on site bore hole loading in open
cast mining. Gives hundred percent bore hole coupling for most effective utilization
of energy. Non cap sensitive explosive initiated either by primers or boosters. Our pump
able emulsion is aluminised and water in oil type. Density can be varied at site depending
upon parameters and strata condition to give the best results.
|
|
Technical Specification
|
| Product |
Density (gm/cc) |
VOD (unconfined) (Mts/Sec.) |
Shelf life |
Water Resisteance |
Sensitivity |
Cartridge color code |
| Bharat Prime |
1.10 - 1.20 |
4000(+-200) |
6 months |
Excellent |
Detonator and detonatin fuse |
Red |
| Bharat Base |
1.15 - 1.25 |
4000(+-200) |
6 months |
Excellent |
Booster / Primer |
Blue |
| Bharat Column |
1.05 - 1.22 |
3800(+-200) |
6 months |
Excellent |
Booster / Primer |
White |
| Bharat Mite |
.80 - .90 |
2800(+1200) |
6 months |
For dry and moist holes |
Booster / Primer |
Blue |
| Bharat Blast 60 |
1.10 - 1.20 |
3400(+-200) |
6 months |
Excellent |
No. 6 Strength Detonator and detonatin fuse |
Natural Polythene Color |
| Bharat Blast 80 |
1.15 - 1.25 |
3800(+-200) |
6 months |
Excellent |
No. 6 Strength Detonator and detonatin fuse |
Natural Polythene Color |
| Bharat Shakti |
1.00 - 1.20 |
4000(+-200) |
Site mixed |
Excellent |
Booster / Primer |
Straight Emulsion |
| Bharat Super |
1.00 - 1.12 |
3500(+-200) |
Site mixed |
For dry and moist holes |
Booster / Primer |
Heavy Anfo |
|
|
Packaging
|
|
Large DIA Explosives Water gel and powder explosives are packed in sturdy
polythene bags, clipped with aluminised clips or rubber bands on both ends. These
cartridges, in turn, are packed in corrugated fibre board boxes. Net weight of explosive
packed in each box is 25 kg.
Small DIA Explosives Thery are packed in sturdy polythene tubes of 25 mm.
Each cartridge weighs 140 gms. Cartridges are tucked at one end and heat sealed at the
other end. They are packed and supplied in corrugated fibredboard boxes. Each box carries
net 25 ks of explosives. Number of cartridges in each box is 172 to 185 nos.
NOTE: for best results "first come first serve" concept in usage of explosive is advisable.
Excepting that the product will be of merchantable quality no warranty of any kind is
given. The manufacturer shall not be liable for any consequential damages or expenses,
under any circumstances.
|
|
Technical Specification of Large DIA & Small DIA Explosives
|
| Brand Name of product |
Bharat TOE Large DIA |
Bharat Prime Large DIA |
Bharat Base Large DIA |
Bharat Column Large DIA |
Bharat Blast 80% Small DIA |
| Dimensions & (Dia in mm) |
83mm & 125mm / 200mm |
83mm & 125mm / 200mm |
83mm & 125mm / 200mm |
83mm & 125mm / 200mm |
25mm dia |
| Type |
Slurry |
Slurry |
Slurry |
Slurry |
Slurry |
| Weight |
2.78kg / 6.25kg / 12.50kg |
2.78kg / 6.25kg / 12.50kg |
2.78kg / 6.25kg / 12.50kg |
2.78kg / 6.25kg / 12.50kg |
125gms |
| VOD (Unconfined) (m/sec.) |
4200 ± 200 |
4000 ± 200 |
4000 ± 200 |
3800 ± 200 |
4200 ± 200 |
| Density (gms/cc) |
1.15 ± 0.05 |
1.15 ± 0.05 |
1.15 ± 0.05 |
1.15 ± 0.05 |
1.15 ± 0.05 |
| Cap Sensitivity |
Sensitive to No.6 Detonators & Detonating Fuse |
Sensitive to No.6 Detonators & Detonating Fuse |
Sensitive to Booster |
Sensitive to Booster |
Sensitive to No.6 Detonators & Detonating Fuse |
| Water Resistance |
Excellent |
Excellent |
Excellent |
Excellent |
Excellent |
| Applicability |
Suitable for Opencast Blasting |
Suitable for Opencast Blasting |
Suitable for Opencast Blasting |
Suitable for Opencast Blasting |
Suitable for Opencast / Underground non coalBlasting |
| Packing |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
|
|
Bulk - SME Explosives (Bharat Shakti)
|
| S.No. |
Characterisitics |
Specifications |
| 1. |
Velocity of Detonation (m/sec) |
4000 ± 500 |
| 2. |
Critical Density (gms/cc) |
1.15 |
| 3. |
Viscosity |
70000 cps |
| 4. |
Sleeping time |
10 days minimum |
|
|
Technical Specification of Large DIA & Small DIA Permited Explosives
|
| Brand Name of product |
Nova Prime |
Nova Column |
Nova Coal 1 |
Nova Coal 5 |
Nova Lite Cast booster |
Nova Cord II D-FUSE |
| Dimensions & (Dia in mm) |
83mm & 125mm / 200mm |
83mm & 125mm / 200mm |
32mm |
32mm |
34mm |
4.5mm |
| Type |
Slurry |
Slurry |
Slurry |
Slurry |
- |
- |
| Weight |
2.78kg / 6.25kg / 12.50kg |
2.78kg / 6.25kg / 12.50kg |
250gm |
185/200gm |
100 gm & 250 gm |
10 g per mtr |
| VOD (Unconfined) (m/sec.) |
4000 ± 200 |
3800 ± 200 |
3400 ± 400 |
3000 ± 200 |
6000 - 7000 |
6500 ± 500 |
| Density (gms/cc) |
1.15 ± 0.05 |
1.15 ± 0.05 |
1.15 ± 0.05 |
1.10 ± 0.05 |
1.5 – 1.6 |
– |
| Cap Sensitivity |
Sensitive to No.6 Detonators & Detonating Fuse |
Sensitive to Booster |
Sensitive to No.6 Detonators |
Sensitive to No.6 Detonators |
Sensitive to No.6 Detonators & Detonating Fuse |
Sensitive to No.6 Detonators |
| Water Resistance |
Excellent |
Excellent |
Excellent |
Excellent |
Excellent |
Excellent |
| Applicability |
Suitable for Opencast Blasting |
Suitable for Opencast Blasting |
Suitable for gassi degree 1Mines |
Suitable for gassi degree 1&2 Mines for B.O.S. |
Suitable for boostering cartridge as well as bulk explosives |
Suitable for down the hole and trunk line |
| Packing |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
25 kgs per Case |
|